Standard sinking (MS4/2)

This sinking main line offers superb sensitivity and bite detection over extreme distances. Carefully designed to sink reliably, the round profile and Teflon coating deliver longer, smoother casting. The Teflon coating also significantly improves abrasion resistance. This sinking main line is ideal for the most demanding locations.

Construction

The MS4/2 series is braided with 4 carriers. During construction of the line different materials are used. The MS4 series is very round, feels soft and is strong in relation to its diameter.

 

MS4/2   20 22 24 26 30 34
Diameter mm 0.20 0.22 0.24 0.26 0.30 0.34
Maximum linear kg 7.90 10.00 11.30 13.10 17.30 23.50
Breaking strength lbs 17.30 22.00 24.80 28.80 38.00 51.60
Average linear kg 7.40 9.60 11.10 13.0 16.60 22.70
Breaking strength lbs 16.20 21.00 24.40 28.60 36.50 49.80
Single knot kg 3.60 4.00 4.90 5.60 7.60 8.70
Breaking strength lbs 7.90 8.80 10.80 12.30 16.70 19.00
Picks per cm 6.0 6.0 6.0 6.0 6.0 6.0
Weight g/m 0.063 0.076 0.088 0.092 0.096 0.134
Sink rate cm/s 2 2 2 1 1 3
Elongation at breaking point % 4.7 2.1 1.5 2.8 1.9 2.6

 

MS4/2   42 46 50 60 74
Diameter mm 0.42 0.46 0.50 0.60 0.74
Maximum linear kg 24.60 34.50 38.30 43.60 48.10
Breaking strength lbs 54.00 75.80 84.20 95.80 105.80
Average linear kg 24.10 34.20 36.70 42.00 46.80
Breaking strength lbs 53.00 75.20 80.60 92.40 103.00
Single knot kg 11.50 13.30 15.90 23.70 24.50
Breaking strength lbs 25.30 29.20 35.00 52.00 54.00
Picks per cm 6.0 6.0 6.0 6.0 6.0
Weight g/m 0.180 0.202 0.256 0.325 0.387
Sink rate cm/s 3 2 2 2 1
Elongation at breaking point % 3.5 2.5 2.6 3.5 5.3